[. . . ] In some countries or regions, the shape of the power plug and power outlet may sometimes differ from that shown in the explanatory drawings. ¶ This component cannot be operated alone; please use in combination with the CD receiver XC-L77. This product complies with the Low Voltage Directive (73/23/EEC), EMC Directives (89/336/EEC, 92/31/EEC) and CE Marking Directive (93/68/EEC). Condensation may form inside the recorder if it is brought into a warm room from outside, or if the temperature of the room rises quickly. [. . . ] The CD display showing a disc with 14 tracks and a total playing time of 59:47 4 If you want to record just one CD track, select it using the $ and > buttons. The recorder goes into record-pause mode, waiting for you to start the CD player. The SYNCHRO indicator lights and the red MD record indicator flashes Recording starts automatically with the CD. Should you want to stop recording before the track/disc has finished playing, simply press & any time during the recording. Once the track or disc has finished, the recorder goes into record-pause mode. At this point, you can either press & to finish the recording session, or continue recording a different disc (or tracks) by repeating steps 3, 4 and 6. Once recording starts, the MD record indicator remains lit You can find out how much blank space you have left on the disc by switching the display mode at this point. Recording starts and stops automatically with the tape, and you can set the tape to auto-reverse so that you can copy both sides of the tape all in one go. Make sure that the erase-protect tab is closed so that you can record. If there's already material recorded on the disc, the recorder automatically records new material after what's already there--there's no need to search for blank space to record on. You can find out how much blank space you have left on the disc by switching the display mode at this point. Display shows the number of tracks in the playlist and the total running time You can only check the playlist order when the disc is stopped. Once stopped, you can step through the playlist using the $ and > buttons. Each track number on the playlist is displayed together with the track length. If you then press CANCEL, the total playing time of the playlist is displayed. If you want to delete the playlist without ejecting the disc, simply press CANCEL twice. You can set the MD player to repeat just a single track, or the whole disc. This menu option is available when the disc is stopped, paused or playing. Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. Three options are available: Remember: switch between menu options using the $ and > buttons; select the option by pressing SET. After setting a repeat mode, the display shows RPT for repeat all, or R1 for repeat track In one track repeat mode, any track you choose will repeat. If you jump to another track (using track skip), then the new track will start repeating. [. . . ] , you can't redo an edit), and track/disc naming while in record mode. The MD does not contain any recorded information (including disc name information). The disc does not have the space for recording the track number and character data (including disc/track names). The UTOC data cannot be written properly due to physical shock or disc damage. [. . . ]